Self-priming centrifugal, heavy duty solids-handling, medium head pumps with reprime capability, and advanced design and maintenance features

Self-priming centrifugal, heavy duty solids-handling, high head pumps with advanced design and maintenance features

Self-priming centrifugal, limited solids-handling, high efficiency pumps with reprime capability, and advanced design and maintenance features

Self-priming centrifugal, end suction, heavy duty solids-handling pumps for medium head applications

Self-priming centrifugal, end suction, limited solids, open impeller pumps for medium head applications

Self-priming centrifugal, straight in suction, enclosed impeller, high head pumps for clean liquids.

Also available with PTO (Power Take-Off), DC Motor, or Hydraulic Motor drive options.

Engine driven configurations are available for many of the iconic pumps listed above including the Super T Series, Ultra V Series, 10 Series, and 80 Series allowing these high-performance pumps to go off the grid and operate anywhere and everywhere they are needed.

Portable, sound-attenuated pumping systems with solids-handling capabilities for applications with noise requirements. An acoustically treated enclosure with lockable doors maintains noise levels as low as 63 dBa while operating at full load, and the fuel capacity allows a minimum of 24 hours of continuous operation. Plus, Auto-Start controls come standard to start and stop the pump in response to fluctuating liquid levels.

General purpose standard centrifugal, end suction, high efficiency pumps for clean liquids

Heavy-duty standard centrifugal, end suction, high efficiency pumps for a variety of applications from clear fluids to dirty liquids and mild abrasives

Standard centrifugal, side suction, enclosed impeller pumps for high head applications with clean liquids

Standard centrifugal, end suction, high pressure, high volume pumps with exceptional efficiencies (up to 85%) with clean liquids. Discharge on many models can be placed in any position by turning the pump casing.

Also available in a portable, high-pressure fire pump configuration with engine drive that can deliver up to 156 PSI and 250 GPM.

Standard centrifugal, end suction for clean liquid and solids-handling applications.

The 6500 Series was designed to extend Gorman-Rupp’s end suction centrifugal pump offering and to better serve applications where a suction lift is not required.

Submersible, centrifugal, trash handling pumps for many applications.

Available in slide rail and construction / trash versions for use in most liquid removal applications.

For drilled wells, narrow cofferdams and hard-to-reach places, Gorman-Rupp’s Slimline submersible pumps are lighter and easier to handle than their larger Widebase cousins.

Submersible, centrifugal, portable pumps for contractor and industrial applications.

Whatever the application – general construction, strip mining, tunnel work or general purpose – Gorman-Rupp Widebase pumps are built to operate quietly, effectively and safely.

Mine Safety and Health Administration (MSHA) approved submersible pumps for coal and gassy mines. Many models are available with stainless steel fitted parts or all-stainless construction for pumping in severe corrosive/abrasive applications. Standard with NEMA type 10 explosion-proof control box.

Slim, lightweight submersible pumps for dewatering applications where solids are not a concern. Ideal for flooded basements, pools, ponds, pits or anywhere else the pump can be lowered into the water. A 12 Volt model is available that can run off a truck battery in the event of a power failure.

Submersible, centrifugal, shredder pumps for dirty drainage and sewage.

Featuring an enhanced spiral shredder mechanism plate and carbide-tipped impeller to prevent clogging and reduce maintenance when cutting through stringy, fibrous and sludge-type waste. Applications include sewage pumping stations, septic tanks, sewage treatment plants, dirty water drainage, & flood and emergency use.

Submersible, centrifugal, vortex impeller pumps, hydraulic powered for trash/sewage applications.

Plus, Gorman-Rupp can provide the hydraulic drive units.

Priming assisted, centrifugal, solids-handling pumps, venturi and compressor priming system for medium to high head contractor and bypass applications

Priming assisted, centrifugal, solids-handling pumps, venturi and compressor priming system for high head/high flow contractor and bypass applications

Gorman Rupp’s PA Series priming assisted pumps are also available with an acoustically-treated enclosure that provides excellent corrosion resistance and offers a significant reduction in sound levels (68 dBA at 23’).

Also available with natural gas engine-driven configuration.

Dewater your job site without taking a chunk out of your bottom line. For applications not requiring higher head and higher flow, VPA Series™ pumps offer the same quality components you have grown to expect from the experts at Gorman-Rupp.

Available with D.O.T.-approved wheel kit or drag base for maximum portability.

Standard centrifugal with integral variable capacity vane pump, end suction pumps for petroleum products, petrochemicals, and solvents.

Roto-Prime pumps are actually two pumps in one: a vane pump used during the priming cycle, and a standard centrifugal pump to move the liquid. Also, the variable-capacity vane pump quickly and automatically evacuates air and vapor, making the pump ideal for applications like loading and off-loading transports and stripping hoses.

Complete packaged systems
for heavy-duty solids-handling lift stations.

A wide range of options for sizes, enclosures, pump configurations, accessories, and more allow these to be fully customizable for any application and any requirements.

Priming assisted, centrifugal, solids-handling pumps, venturi and compressor priming system for high head/high flow contractor and bypass applications.

With ReliaSource^® Below-Ground Lift Stations, the only thing visible above ground is an inconspicuous entrance tube, making these packaged systems an ideal choice for residential settings. Because the self-priming pumps in these lift stations allow for shallow burial, installation is easy and inexpensive, and there’s no need for elevators or platforms.

Get power outage protection in a space-saving pump/electric motor/engine combination.

Priming assisted, centrifugal, solids-handling pumps, venturi and compressor priming system for medium to high head contractor and bypass applications

Save money and improve safety with above-ground controls and valves for your submersible pumps while also eliminating the need for a separate valve pit.

Available with SF Series® slide rail-mounted submersible pumps.

Portable hydraulic piston pump designed for applications involving the heaviest sludges, slurries and other viscous materials.

The SludgeKat is available as a complete package mounted to the hydraulic power pack with fuel tank base or as a pump end replacement kit mounted to the pump end frame. Skid-mounted units come standard with wheel kit and the latest in Tier IV engine-driven technology.

Diaphragm pumps by Gorman-Rupp help you pump muddy, mucky, sand-laden liquids and slow seepage for construction, agricultural and industrial applications that require the pumps to run dry for extended lengths of time. Available basic or electric driven.

The Gorman-Rupp HO Series hand pump provides a simple solution for the easy transfer of light to medium, mild-corrosive liquids such as gasoline, lube oil and diesel fuel. High quality, compact and self-priming they provide reliable service in critical, military and marine applications.